Tire pressure system

From ScionZoneWiki

This article may contain information used to modify a product you have purchased. This modification may impair or destroy your product, cause injury, and it may void the warranty on your product. Undertake any steps or modifications at your own risk. ScionZone.Com, BVerticals.Com and the author of this content do not accept any liability for damage or injury caused by using the content of this article. Contact a professional before attempting any modification of your vehicle.

This article will show you how to reset the tire pressure warning system on the Scion tC. All content of this article is at-your-own-risk. The original steps posted by Nick 06 tC.

• check and make sure that your tires are inflated to the correct pressure
• turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (in the glove box) until the warning light turns off and then release the switch.
• now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.
• initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.